What are the advantages of high speed wipes machine? What are the common failures?
The High Speed Wet Towel Machine is a small intelligent appliance designed to adapt to modern life and change the traditional towel use habits. It can produce fresh, hygienic, hot and cold wipes. The processed high-grade spunlace nonwoven fabric can be processed into wet wipes, which can be used once, avoiding the cross infection caused by the reuse of traditional towels. Compared with other products, the high-speed wet wipes machine has the following advantages:
1. good, convenient and hygienic. Wet paper towel machine adopts unique roll structure and cutter to make wet paper towels automatically. The wet paper towel and paper roll in the machine will be separated immediately, which will not cause pollution of paper towel. Adopt electronic automatic sterilization, fresh and hygienic.
2.Low cost. Each roll of wet paper towel is only 10 cents, saving a lot of money than other bags of wet paper towels.
3.High-speed wet wipes machine uses pure plant fiber hydroentangled nonwoven soft towel rolls and water as raw materials to make wet wipes, no stimulation and no additives, gentle skin care. If necessary, you can also add disinfectant or plant essential oils in the water tank to make disinfectant or aromatic wipes.
4. Use anytime, anywhere, open at any time. Nowadays, the bagged wipes used in general hotels have the danger of secondary pollution, and storage also takes up space. Wet wipes if accidentally wet, will become dry wet wipes. In addition, to guests with bagged wipes than wipes on the tray of wipes to be a lot more cordial, so that guests feel at home.
5. High-speed wipes machine can adjust hot and cold by itself. High-speed wet wipes machine is equipped with hot and cold knobs, the temperature between 10 and 80, in the cold winter, with warm wet wipes to wipe the hands of the guests, to show the master’s impeccable service. If your hotel is still using traditional napkins for your guests, consider the benefits of using sanitized wipes.
Statistically, traditional napkins are made from recycled waste paper and are seriously overloaded with bacteria, so none of this is a problem if you use a towel dispenser. High speed wet wipes machine is suitable for hotels, guesthouses, hospitals, kindergartens, public places and so on.
5.The sealing machine of wet wipes packaging machine stops and starts.
In production, we have encountered the problem that the sealing machine stops and starts and the speed is not consistent. Disassemble the panel on the back of the sealing machine, and found that the connection between the shaft of the motor and the gearbox came off and loosened. Tightening the screws again and all alignment also solved the problem.
In addition, the main motor of the high-speed wet wipes machine runs on carbon brush contact. If the carbon brushes are badly worn, incomplete contact with the slip ring, or bad friction, it will also cause the sealing machine to go and stop. Changing a new carbon brush of the same model will solve the problem.
This kind of high-speed wet wipes machine failure is also very common, although it does not cause package leakage. But it affects the aesthetics of the package and destroys the image of the goods.
(1) Wet wipes packaging machine equipment used for a long time, dust, plastic shavings and other dirt attached to the high temperature belt, resulting in the high temperature belt is not smooth and uneven, resulting in uneven heat for sealing. Air bubbles appear after the cold pressure wheel pressure, again cleaning or replacement of high-temperature belt can be troubleshooting. High-temperature belt is generally 1.5cm wide, about 22m thick, sticky dirty wash will have to be scrapped.
(2) Cold press rubber wheel with irregular concave and convex traces, directly reflected in the packaging, so that there are more obvious traces on the seal. In order to ensure the appearance of the bag, it is recommended to replace the cold press rubber wheel.
6. Wet wipes packaging machine should pay attention to the maintenance of the problem
(1) The sealing machine should be placed in a ventilated and dry place. The general room temperature should be maintained at about 25.
(2) Add No. 6 oil to all moving parts every 48 hours of operation. At the main gears, bearings and gear box, etc.
(3) The high speed wipes machine should be dusted regularly to keep the whole machine clean. Unplug it when not in use and cover it with a cover cloth.
(4) If the working time is too long, please turn on the cooling fan before shutting down the machine. Turn off the machine after the temperature drops, because it will turn off the machine without cooling, and the high-temperature belt will be easily damaged.
(5) Remove dirt from the high temperature belt regularly. Ensure the sealing quality.
(6) Parts with serious wear and tear must be replaced immediately to extend the life of the whole machine.
